Show me how you would check that the brake lights are working on this vehicle (I can assist you, if you need to switch the ignition on, please don’t start the engine).
Operate brake pedal, make use of reflections in windows, garage doors, etc., or ask someone to help.
Tell me how you would check that the headlamps, sidelights and tail lights are working.
Explain: Operate switch (turn on ignition if necessary), walk around the vehicle.
Show me how you would switch on the rear fog light(s) and explain when you would use it/them (no need to exit the vehicle).
Operate switch (turn on the ignition and dipped headlights if necessary). Check warning light is on. Explain use.
Show me how you switch your headlight from dipped to main beam.
Operate switch (with ignition or engine on if necessary); check with main beam warning light.
Show me how you would set the windscreen demister to clear the windows effectively.
Set all relevant controls including; fan, temperature, air direction/source and heated screen to clear windscreen and windows. The engine does not have to be started for this demonstration.
Show me how you would check that the direction indicators are working.
Applying the indicators or hazard warning switch and check the functioning of all indicators.
Show me how you would clean the windscreen using the windscreen washer and wipers.
Operate control to wash and wipe windscreen (turn ignition on if necessary).
Show me what instrument checks you would make before and after starting the engine on this vehicle.
Check to make sure all gauges and warning systems are working. Ensure that all gauges are reading correctly and that warning lights / audible warning devices are extinguished before moving away.
Show me / explain how you would check that the power-assisted steering is working.
If the steering becomes heavy, the system may not be working properly. Before starting a journey, two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively, turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Tell me how you would check the condition of the windscreen and windows on this vehicle.
The windscreen and windows must be clean, clear and free from defects. No mascots or sticker that restrict the view.
Tell me how you would check the condition of the windscreen wipers on this vehicle.
Windscreen wipers must operate. Blades should be in good condition.
Identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.
Identify dipstick/oil level indicator, describe check of oil level against the minimum/maximum markers.
Identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.
Identify high/low-level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.
Tell me the main safety factors involved in loading this vehicle.
The load should be evenly distributed throughout the length of the vehicle so as not to affect control while the vehicle is being driven. Any load must be carried so that it does not endanger other road users. It must be securely stowed within the size and weight limits of the vehicle. The load needs to be secure so that it cannot move or fall from the vehicle when cornering or braking.
Tell me how you would check the condition of the body is safe on this vehicle.
As part of a daily walk-round check, ensure the body is fully roadworthy, and there are no significant defects. No loose panels or items, which could endanger other road users. All inspection panels must be secure.
Show me how you would check the wheel nuts are secure on this vehicle.
A visual check to identify any nuts that are obviously loose and check that the wheel nut indicators (if fitted) are in alignment.
Tell me how you would check your tyres to ensure that they are correctly inflated, have sufficient tread depth and that their general condition is safe to use on the road.
Follow the manufacturer’s guide, using appropriate equipment, check and adjust pressures when tyres are cold. Must have a tread depth of at least 1mm across ¾ of the breadth of the tread and in a continuous band around the entire circumference. There should be no cuts, damage or signs of cord visible at the sidewalls.
Tell me how you would check the condition of the reflectors on this vehicle.
Ensure that all reflectors are fitted, clean, and functional (not cracked or broken).
Show me how you would check that all doors, including cargo doors, are secure.
All doors must be closed, and locking levers for cargo doors are set in the recommended secured position.
Tell me how you would check the condition of the suspension on this vehicle.
As part of a daily walk-round check, the suspension should be checked for any obvious signs of deterioration or damage.
Show me how you would replace the tachograph disc on this vehicle.
Candidate to demonstrate how to insert tachograph disc. Digital tachographs may require an explanation if the candidate does not have a digital card.